- Self Balancing
- Kick Scooters
- IoT/GPS Trackers
July 13, 2016 1 min read
How to Calibrate the Ninebot PTR E Plus or Ninebot Elite
Step 1: Make sure the machine is on and the platform is level.
Step 2: Using the remote, press the lock button (bottom button.)
Step 3: Press the power button (top button) on the remote 4 times until all 5 LED’s are present (they will automatically reset to just the single middle LED after about 1 second.)
Step 4: Press and hold the speed limit button (right-side button) until you hear 2 sets of double beeps.
Step 5: Press the lock button (bottom button) on the remote to unlock your machine.
Your Ninebot PTR E has now been recalibrated and is ready to go!
Comments will be approved before showing up.