Cart
cload
Checkout Secure

Replacement of Decorative Front Strip (Front Fascia)

Decorative Front Strip

Tools Required: 2.5 mm hex wrench

Removal of Decorative Front Strip

  • Make sure the miniPRO is powered off and the charger is not connected
  • Remove the Battery

WARNING!

Press the Power Button until all lights are off to discharge any power remaining in the miniPRO.

  • Remove the Steering Bar.
  • Place the unit upside-down.
  • Remove the plastic wire protector.

  • Unplug the Headlight wire harness.
  • Using a 5 mm hex wrench, remove the four fasteners.

  • Remove the Front Strip

Installation of Decorative Front Strip

  • Install in the reverse order of removal.

You can purchase replacement decorative front strip here.